Back to all guides

PAN Card Signature Image Requirements CSC: Size, DPI, Format and Upload Guide

Are you a CSC operator looking for the correct PAN card signature image requirements? Preparing the applicant’s signature in the correct format is an important part of the PAN application process.

Many Common Service Centre operators face problems while uploading signature images because the file size is too large, the format is incorrect, or the scanned signature does not meet the portal’s requirements.

For example, a signature image prepared for Protean may not work on the UTIITSL portal. Similarly, the requirements for a digitally signed application may differ from those for an application submitted through scanned documents.

If you operate a CSC centre, understanding these differences can help you prepare files correctly and reduce unnecessary upload errors.

In this guide, you will learn about PAN card signature image requirements for CSC, including file size, scanning resolution, image format, signature preparation, and the correct upload process.

We will also explain why you should always check the instructions displayed on the active PAN application portal before uploading the applicant’s signature.

PAN Card Signature Image Requirements for CSC

The signature image requirements depend on the PAN application service provider and the application method selected by the CSC operator.

In India, the Income Tax Department recognises two authorised PAN application service providers: UTIITSL and Protean eGov Technologies.

Here is a comparison of the available published instructions:

Requirement UTIITSL through CSC Protean Scanned e-Sign Protean DSC
File format JPEG/JPG as required by portal JPEG JPEG
File size Follow current portal limit Maximum 50 KB Maximum 10 KB
Scanning resolution 600 DPI in a published CSC service FAQ Less than 200 DPI 200 DPI
Signature colour Black ink, black-and-white scan in CSC FAQ Follow current upload instructions Colour
Dimensions Confirm on active upload screen 2 cm high Ɨ 4.5 cm wide 2 cm Ɨ 4.5 cm

Important: These specifications belong to different application workflows. They should not be treated as one universal PAN signature standard.

A publicly available CSC service helpdesk FAQ for the UTIITSL workflow mentions a black-ink signature scanned at 600 DPI in black and white, with a file size below 60 KB. However, the current publicly accessible UTIITSL application page refers to JPEG/JPG uploads according to the required specification without displaying a permanent numerical signature-size table.

Therefore, CSC operators should verify the actual requirements displayed in their active Digital Seva or UTIITSL application workflow before finalising the image.

Protean also publishes different specifications for scanned e-Sign and DSC-based applications. Always select the correct route first.

How to Prepare a Signature Image for PAN Card Application

Preparing a clear signature image is simple when you follow the correct scanning process.

Follow these steps before uploading the applicant’s signature:

Step 1: Take a Clean White Sheet of Paper

Take a plain white sheet of paper without lines, designs, or coloured backgrounds.

Ask the applicant to sign using their genuine signature.

For the UTIITSL CSC workflow, the published CSC helpdesk instructions specify a black-ink signature.

Avoid using a light-coloured pen because the signature may become difficult to read after scanning.

Step 2: Make Sure the Signature Is Complete

Check the signature before scanning it.

It should be:

  • Clearly visible.
  • Complete and properly written.
  • Free from unnecessary marks.
  • Written by the actual applicant.
  • Positioned within the available signing area.

Do not cut off the beginning or end of the signature while cropping the image.

Step 3: Scan the Signature

Use a flatbed scanner or another suitable scanning device.

Select the scanning settings according to the application provider.

For example:

  • UTIITSL CSC reference: 600 DPI, black-and-white scanning.
  • Protean DSC instructions: 200 DPI, colour scanning.
  • Protean scanned e-Sign instructions: DPI below 200.

Do not apply 600 DPI to every PAN application simply because one CSC workflow mentions it. The selected portal’s instructions should determine the final settings.

Step 4: Crop the Signature Properly

After scanning, open the image in an editing application.

Remove unnecessary white space around the signature while keeping the entire signature visible.

Make sure that:

  • No part of the signature is cut off.
  • The signature is not stretched.
  • The image has a clean background.
  • The original appearance is maintained.

Cropping can reduce unnecessary image data and make the signature easier to view.

Step 5: Reduce the File Size

Sometimes the scanned signature is larger than the portal’s permitted limit.

For example, a high-resolution scanned image may be 150 KB or 300 KB.

In that situation, use an image compression tool to reduce the size according to the portal’s requirements.

However, do not compress the signature so much that it becomes unclear. Always check the final file size before uploading.

Which File Format Is Required for a PAN Signature Image?

The accepted signature format depends on the application provider.

For example, the UTIITSL online PAN application instructions specify JPEG/JPG for picture and signature uploads in the applicable digital application routes.

Protean’s published scanning instructions also specify JPEG for signature images.

Application Route Signature Format
UTIITSL online upload JPEG/JPG
Protean scanned e-Sign JPEG
Protean DSC application JPEG
Physical application Signature on printed form

Before uploading, check the supported extensions displayed on the portal.

One common mistake is changing the file name from PNG to JPG without actually converting the image. Changing the extension does not change the original image format.

Use a proper image conversion tool whenever conversion is required.

How to Upload a Signature Image on the PAN Application Portal Through CSC

The exact process may differ depending on the PAN service selected through Digital Seva.

However, the general process is as follows:

Step 1: Log in to Digital Seva

Open the official CSC Digital Seva portal and log in using your authorised VLE credentials.

Navigate to the available PAN services.

Step 2: Select the PAN Service Provider

Check which service provider is being used for the application.

The active workflow may direct you to UTIITSL or another authorised PAN application service.

Do not assume that the specifications of one provider will work for another.

Step 3: Select the Correct Application Type

Check whether the applicant needs a fresh PAN or a correction in existing PAN details.

Under the PAN forms effective from 1 April 2026, the new forms include:

  • Form 93 for individual Indian citizens.
  • Form 94 for non-individual Indian entities.
  • Form 95 for individuals who are not Indian citizens.
  • Form 96 for non-individual foreign entities.
  • Form CR-01 for individual PAN corrections.
  • Form CR-02 for non-individual PAN corrections.

Always select the appropriate category according to the applicant’s details.

Step 4: Enter the Applicant’s Details

Fill in the required information carefully.

Check the applicant’s name, date of birth, address, and other details against the supporting documents.

Incorrect information can create problems during PAN processing.

Step 5: Upload the Signature Image

Open the photo and signature upload section.

Select the correct signature file from your computer.

Before uploading, verify:

  • Correct image format.
  • Permitted file size.
  • Required scanning resolution.
  • Proper image dimensions.
  • Clear signature appearance.

Some online portals also provide a crop option to adjust the image.

Step 6: Preview and Submit

After uploading the signature, check the preview carefully.

Make sure the signature is not blurry, stretched, or incorrectly cropped.

Complete the remaining application steps and follow the payment and authentication instructions displayed by the provider.

Save the application reference number and transaction details for future tracking.

Difference Between Digital Signature Upload and Physical PAN Application Signature

This is an important point that CSC operators should understand.

A scanned signature image and a physical signature on a printed application form are not always the same requirement.

In a paperless online application, the applicant’s signature image may be uploaded electronically as a separate file.

In a physical application workflow, the applicant may need to print the completed form, paste photographs, and sign in the designated areas.

For example, UTIITSL’s published physical application instructions require photographs of 4.5 cm Ɨ 3.5 cm and signatures at specified positions on the printed form.

Similarly, Protean provides instructions for signing its printed acknowledgement.

Therefore, do not assume that uploading a signature image completes every signature-related requirement. Always check whether the selected application method requires electronic upload, physical signing, or Aadhaar-based e-Sign.

Common Signature Upload Errors and Their Solutions

CSC operators may encounter different errors while uploading a PAN signature image.

Here are some common problems and practical solutions:

Upload Problem Possible Solution
File size exceeds the limit Compress the image according to the portal limit
Unsupported file format Convert the image into the accepted format
Signature is blurry Scan again using the required resolution
Signature is not visible Improve contrast and rescan
Image dimensions are incorrect Crop and resize according to the portal
Upload button does not work Check the file and try refreshing the application carefully
Wrong signature uploaded Select the correct applicant’s signature before submission
Application shows an objection Read the objection reason and upload the requested correction

One important precaution is to avoid repeatedly submitting the same incorrect file.

First understand the error message, correct the image, and then upload the revised file.

If the portal continues showing an error despite following its instructions, contact the service provider’s official support team.

Important Precautions for CSC Operators

A CSC operator handles important personal information belonging to applicants.

Therefore, file preparation is not the only responsibility. Protecting the applicant’s information is equally important.

Follow these precautions:

  • Use the applicant’s genuine signature: Never create or imitate a signature on behalf of the applicant.
  • Check the correct service provider: Confirm whether the application is being processed through UTIITSL or Protean.
  • Do not use random online converters: Use a trusted tool for resizing or converting signature images.
  • Maintain privacy: Do not share applicant signatures, Aadhaar information, or other personal documents unnecessarily.
  • Keep files organised: Use separate folders for different applicants to avoid uploading the wrong signature.
  • Check the preview: Always verify the uploaded image before submitting the application.
  • Follow the latest instructions: Portal requirements can change. Do not depend entirely on old CSC training documents or previously saved image settings.

Official Websites to Check PAN Card Signature Requirements

For accurate information, CSC operators should refer to the official PAN service providers.

Here are the most useful resources:

1. UTIITSL Official PAN Portal:
https://www.pan.utiitsl.com/
This portal provides PAN application, correction, and tracking services. Its live application workflow displays the accepted file formats and upload instructions.

2. Protean eGov Official PAN Portal:
https://tinpan.proteantech.in/services/pan/pan-index
Protean provides online PAN application services and separate instructions for scanned document and DSC-based applications.

3. Protean Signature Scanning Guidelines:
Protean DSC Scanning Instructions
This official page provides the scanning specifications for DSC-based PAN applications, including signature format, resolution, dimensions, and maximum file size.

4. Income Tax Department Official PAN Information:
https://www.incometaxindia.gov.in/en/pan
This is the official government resource for PAN application information, approved application service providers, and current PAN forms.

These official resources should be preferred over third-party blogs and old image-resizer instructions.

Frequently Asked Questions

What is the PAN card signature image size for CSC?

There is no single file-size limit for every CSC PAN application. A publicly available CSC service FAQ for the UTIITSL workflow mentions a signature file below 60 KB. However, operators should verify the current upload limit on their active portal.

What DPI is required for a PAN card signature through CSC?

The published CSC service FAQ for the UTIITSL workflow mentions 600 DPI and black-and-white scanning. Other providers have different requirements. For example, Protean's DSC instructions specify 200 DPI in colour.

Which pen should be used for a PAN card signature?

For the UTIITSL CSC workflow described in the published CSC FAQ, a black-ink signature is specified. Using a black ball-point pen on a clean white sheet is a practical choice. Always follow any additional instructions displayed by the provider.

Can I upload a PNG signature for a PAN card?

The UTIITSL online application instructions specify JPEG/JPG, while Protean's published scanning guidelines specify JPEG. Convert the image into the accepted format before uploading.

What is the signature dimension for a Protean PAN application?

Protean's scanned e-Sign instructions specify 2 cm in height and 4.5 cm in width. Its DSC guidelines also mention 2 Ɨ 4.5 cm. However, file-size and resolution requirements differ between these application methods.

Can a CSC operator create a signature for the applicant?

No. The signature must be genuine and belong to the applicant. The operator may help scan, crop, resize, and upload the applicant's actual signature, but should never imitate or create a signature on the applicant's behalf.

Is a separate signature image required for Aadhaar-based PAN applications?

It depends on the selected application workflow. Some Aadhaar-based paperless routes may use Aadhaar authentication and may not require a separate scanned signature image. Other e-Sign workflows can still ask for photograph and signature uploads. Follow the active portal instructions.

What should I do if the PAN portal rejects the signature image?

First, check the file extension, size, dimensions, scanning settings, and image clarity. Correct the file according to the displayed error. If the problem continues, contact the official service provider.

Are UTIITSL and Protean signature requirements the same?

No. Their published specifications and application methods differ. Even Protean has separate instructions for scanned e-Sign and DSC-based applications. Always identify the service provider and application mode before preparing the signature.

Where can CSC operators check the latest PAN application instructions?

Operators can check the active Digital Seva workflow, the UTIITSL or Protean official PAN portal, and the Income Tax Department website. These sources should be treated as the final reference for current requirements.

Final Thoughts

Preparing the correct signature image is an important part of the PAN application process at a CSC centre.

However, operators should remember that PAN card signature image requirements are not identical for UTIITSL and Protean applications. Before uploading any file, identify the service provider, check the application method, and follow the specifications displayed on the active portal.

For the UTIITSL CSC workflow, a published service FAQ mentions black ink, 600 DPI, black-and-white scanning, and a signature file below 60 KB. For Protean, the published scanned e-Sign and DSC instructions specify different limits.

Do not use an old or universal signature setting for every PAN application. A clear signature, correct file format, suitable file size, and careful verification can help CSC operators reduce common upload problems and provide a smoother application experience.

Our Headquarters

Signature Resizer is proudly built and maintained in India. We are dedicated to providing the best free tools for students and CSC VLEs nationwide.

New Delhi, India
Built by Badal Kumar